| Item | Description |
| PoE Input Port | 1 x 10/100/1000Base-T RJ45 port |
| PoE Output Port | 4 x 10/100/1000Base-T RJ45 ports |
| PoE Input Power | 50 57VDC, Up to 60W |
| PoE Output Power | 44 57VDC, Up to 30W per port, total 60W MAX |
| PoE Power Budget | SOW @ IEEE802.3at-4pair Ultra PoE Input 20W @ IEEE802.3at High PoE Input 10W @ IEEE802.3af PoE Input |
| PoE Input Pin Assignment | 1/2 (-), 3/6 (+), 7/8 (-), 4/5 (+) |
| PoE Output Pin Assignment | 1/2 (-), 3/6 (+) |
| Indicators | LED indicators are located on the RJ45 connector Power indicator: PoE enabled Network indicator: Link/Act |
| Network cables | Shielded category 5e (or higher) |
| Forwarding Rate | 10BASE-T: 14880pps / port 100BASE-TX: 148800pps / port 1000BASE-TX: 148800000pps/port |
| Switch Architecture | Store-and-Forward |
| MAC address table | 1K |
| Switch Fabric | 1Gbps |
| Switch Buffer | 448Kbits |
| Switch Throughput | 744Mpps |
| Traffic control | IEEE 802.3x full-duplex flow control. |
| Operating Environmental | Operating Ambient Temperature: 0 to 40”C Relative Humidity: Maximum 90%, Non-condensing |
| Storage Environmental | Storage Temperature:-20 to 70”C Relative Humidity: Maximum 95%, Non-condensing |
| Regulatory Compliance | IEEE802.3af (PoE) IEEE802.3at (High PoE) IEEE802.3at-4pair (Ultra PoE) |
| Power Source | PoE Budget | Max Number of PDs Supported | |
| Ultra PoE PSE (60W) | 56W max | Class4 PD@25W | 2 units |
| Class3 PD@15W | 3 units | ||
| Class2 PD@7W | 4 units | ||
| High PoE PSE (30W) | 26W max | Class4 PD@25W | 0 units |
| Class3 PD@15W | 1 units | ||
| Class2 PD@7W | 3 units | ||
| PoE PSE (15W) | 14W max | Class4 PD@25W | 0 units |
| Class3 PD@15W | 1 units | ||
| Class2 PD@7W | 2 units | ||
Euismod fringilla quo vitae sodales ea vitae urna, natus cupiditate possimus felist.
Seattle (Major City In The State Washington).
Shanghai (Major Global Financial Hub Cities
Copyright © 2026 ntsnanotech.com. All rights reserved.
