The working power of the PoE extender is taken from the PoE switch and no additional power supply. It is installed at the end of the 100 meters network cable to extend the network and POE power supply by 100 meters at full speed. As a PoE power supply device, it can automatically detect and recognize the power receiving equipment that meets the standard and supply power through the network cable. It can supply power to POE terminal equipment such as wireless AP, webcam, VoIP, video access control, etc. through a network cable, to meet the network environment that requires high-density PoE power supply, and to reduce the bandwidth to solve the twisted pair POE transmission within 200 meters. It is suitable for hotels, campuses, factory dormitories, and small and medium-sized enterprises to form a cost-effective network.
| Model | NEPX 102 |
| Interface Characteristics | |
| Fixed Port | 2×10/100/1000Base-T PoE ports (Data/Power) 1×10/100/1000Base-T uplink PD RJ45 port (Data/Power) |
| Ethernet Port | Port 1-3 support 10/100/1000Base-T auto-sensing, Full/half duplex |
| Transmission | 1000BASE-T: Cat5e or later UTP(≤100 meter) |
| Chip Parameter | |
| Network Protocol | IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-T, IEEE802.3x |
| Switching Capacity | 12Gbps (non-blocking) |
| LED Indicator | Power: PWR (green), Data: Link(yellow), POE: PoE (green |
| PoE Port | Port 1-2 support IEEE802.3af/at @ POE |
| Power Supply Pin | Default 1/2 (+), 3/6 (-), Optional 4/5(+), 7/8(-) |
| Max Power Per Port | 25W, IEEE802.3af/at (Limited by max input power of at) |
| Total PWR / Input Voltage | 25W (PoE) |
| Power Consumption | Standby<2W,Full load<30W |
| Storage TEMP / Humidity | -40~+80°C, 5%~95% RH Non condensing |
| Operation TEMP / Humidity | -20~+55°C, 5%~90% RH Non condensing |
| Net /Gross Weight | <0.07kg /<0.08kg |
| Dimension (L*W*H) | 103*50*29mm |
Seattle (Major City In The State Washington).
Shanghai (Major Global Financial Hub Cities
Copyright © 2026 ntsnanotech.com. All rights reserved.